Laboratory Glassware Washer, WD-230H

Model : WD-230H

  • Capacity(L) : 223L
  •  Display : 7inch LCD Touch screen
  • Drying Method : Hot air injection via sprinkler  (Circulation of hot air is not less than 110 m³/h)
  • Air Heating Consumption : 3kW
  • External Size(W×D×H) : 930x820x1620mm
  • Power Supply : 380/220V,50/60Hz

Share the product

Laboratory Glassware Washer provides a standardized cleaning solution, with a traceable cleaning process,protect the safety of operators. Start standardizing cleaning process in your laboratory.

Application:

Laboratory glassware washers can effectively clean a wide range of glassware, including beakers, flasks, test tubes, pipettes, burettes, and more. They can remove residues, contaminants, and other substances that may affect the accuracy and reliability of laboratory experiments.

Advantages:

1. Advanced Microcomputer control system with full color LCD touch screen:

*Graphical and digital display of  real-time water inflow, cleaning procedures, cleaning stages, columnar changes in time and temperature , pipeline pressure data and other parameters

*System software can be redesigned to meet customer needs, and it can support the expansion of hundreds of applications.

 *The desktop can be configured to set up quick launch programs.

*Three optional password protection can be set: Finger Print;Password;No password

 

2.Advanced water spray technology

*Pressure pipeline detection : it uses pressure detection sensors to real-time monitor the pressure of the cleaning water pipeline. When the water pressure is too low, it pauses the operation of the water pump to prevent it from running dry.

*The circulating pump adopts soft start variable frequency control to avoid the damage caused by excessive water column pressure to glassware during the instantaneous start of the pump.

*Two parallel water inlets at the back ensure uniform pressure distribution for each shelf and every spray nozzle.

  1.Speed Sensor for Spray
  2.Water Pressure Sensor
  3.Flow Meter
  4.Water Inlet Solenoid Valve
  5.Pure Water Pump
  6.Tap Water Pump
  7.Thermostat Knob
  8.Water Immersion Sensor
    1. Fan
  2.Heating pipe
  3.Air filter
  4.Heat Exchanger

 

3. Modular Design of FL-EXCH Racks

*Each 1/2 module can be interchanged horizontally and vertically.

*The racks adopts a quick-insert design, making installation simple and concise.

 

4. Safety

*Laboratory glassware washers help ensure the safety of laboratory personnel by eliminating the need for manual washing, which can be time-consuming and potentially hazardous. The automated cleaning process reduces the risk of injury from broken glassware or exposure to harmful substances.

*Water heating over-temperature protection, hot air heating over-temperature protection, water pump over-temperature protection, fan over-temperature protection.

*Electronic security lock, EULA electric door switch technology, the experimenter can set the door opening temperature limit.

Cleaning Chart Flow

Scitek Cleaning Chart Flow

Cleaning Process Parameters

Time(min) Temp(℃) Alkaline (ml) Acid(ml) Water source
Pre-wash 2 10 0 0 tap water
Main wash 15 70 50 0 tap water
Neutralization 3 40 0 50 tap water
Rinse 1 1 10 0 0 tap water
Rinse 2 1 10 0 0 purified water
Rinse 3 1 60 0 0 purified water
Drying 5 100 0 0 /

WD-230/WD-230H: High-throughput cleaning while occupying a smaller footprint;

Specification:

Model WD-230H
Capacity(L) 223L
 Display 7inch LCD Touch screen
Standard Program 30
Self-defined Program 120
Searchable

Data Files

Cleaning program files; Cleaning record files; Monitor files
Storage SD card(32G)
Permission Management System Three level
Printer Printer interface
Drying Drying System Double spray and heat exchange system with air inlet HEPA filter
Drying Time Range 0 to 300mins
Drying Temp Range RT to 120℃
Drying Method Hot air injection via sprinkler(Circulation of hot air is not less than 110 m³/h)
Water Inlet pipe Quantity 2
Length Standard: 2m ( Customizable)
Material PVC
Water Pump Brand Sweden
Flow Rate 0-600L/min
Consumption 0.75kW
Pipeline Pressure Monitoring Yes
Structure Material External 304 stainless steel
Cleaning Chamber 316 stainless steel
Door Automatic multi-touch intelligent door.

In standby mode, there is a gap between the front door and the cavity to facilitate water vapor evaporation. Automatically locks when cleaning starts.

Caster Four universal casters at the bottom of the instrument for easy movement
Cleaning Rack 2 layer
Air Heating Consumption 3kW
Power Supply 380/220V,50/60Hz
Total Consumption 5kW
External Size(W×D×H)(mm) 670×691×940
Shipping Size(W×D×H)(mm) 990x860x1370
N.W./G.W. (kg)  135/160

Title

CONTACT INFO

Xuegu Huigu Science and Technology Park, Xiqing District, Tianjin

Phone: +86-531-82893797

Go to Top